549.00 $ USD DeatschWerks 550cc Injectors - United States

Published date: December 23, 2014
  • Location: Warren, Michigan, United States

Part#: dw5506

Bolt-In high flow injectors
Includes O-rings
E85 compatibility
Flow rates and set balancing in-house by DeatschWerks
Flow balanced to within 1-2% (flow report included)
Excellent spray pattern and atomization for optimized idle and tuning
Technical assistance and tuning data available via phone or email to Deatschwerks
3-year comprehensive warranty
Fuel Pressure Range 40-100 psi
Minimum Pulse Width 1.2 ms
Maximum Duty Cycle 91%
Coil Impedance 14.8 ohm
Injector Type Bosch EV6 (standard)
Connector Type Minitimer

Note that these injectors do not have the groove for the OEM alignment clips. They install fine without them but you will need to align the plug during install to ensure they are aimed correctly so the OEM wire harness can plug in.

These Injectors are larger than the factory injectors so please expect the need to retune for these.

Current lead time is 1 week.

Nominal Static Flow Rate

PSI > 43 58 70 80 90 100
cc/min 542 630 709 763 821 859
lb/hr 51.6 60.0 67.5 72.7 78.2 81.8
Please note: Flow rates listed are the nominal (normal minimum) rates for this injector part number. All sets are flow balanced. For actual flow rates of your set, please refer to the flow report that will accompany your order.


Offset in Milliseconds (Pressure vs Voltage)

PSI > 43 58 70 80 90 100
Volts v
8 1.60 1.79 2.12 2.30 2.37 2.52
9 1.30 1.51 1.55 1.77 1.93 1.95
10 0.99 1.30 1.36 1.50 1.64 1.60
11 0.80 1.10 1.17 1.30 1.39 1.27
12 0.69 0.95 1.00 1.13 1.23 1.14
13 0.51 0.73 0.85 0.96 1.08 0.95
14 0.45 0.54 0.78 0.83 0.95 0.84
15 0.31 0.49 0.64 0.75 0.79 0.67
16 0.21 0.41 0.57 0.62 0.62 0.57

Vote
Result 0 votes
NeedsWings
0 votes

Filter by following factors:

Condition:
Parts compatibility:
Shipping:
Share by email Share on Facebook Share on Twitter Share on Google+

Share

Useful information

  • Avoid scams by acting locally or paying with PayPal
  • Never pay with Western Union, Moneygram or other anonymous payment services
  • Don't buy or sell outside of your country. Don't accept cashier cheques from outside your country
  • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"

Related listings

  • DeatschWerks 440cc Injectors
    DeatschWerks 440cc Injectors
    Fuel - United States (Michigan) - December 23, 2014 489.95 $ USD

    Part#: dw4406 Bolt-In high flow injectors Includes O-rings E85 compatibility Flow rates and set balancing in-house by DeatschWerks Flow balanced to within 1-2% (flow report included) Excellent spray pattern and atomization for optimized idle and tuni...

  • Pierburg 55 Fuel Pump
    Pierburg 55 Fuel Pump
    Fuel - United States (Michigan) - December 23, 2014 389.95 $ USD

    Part#: 55fuelpump This is the Pierburg High Flow fuel pump from a 55kompressor car. It will flow significantly more than the OEM srt6/slk32 fuel pump and will maintain better pressure throughout the RPM range whereas the OEM srt6/slk32 pump falls off...

  • Fuel pressure Gauge Fittings
    Fuel pressure Gauge Fittings
    Fuel - United States (Michigan) - December 23, 2014 17.95 $ USD

    Part#: fpsfitting Fittings to adapt a fuel pressure gauge or sensor onto the end of the fuel rail on a SRT6, SLK32 or C32. Includes a 45 degree angle swivel fitting and an adaption fitting to 1/8"NPT. To use the factory airbox/engine cover on a SRT6,...